AA, AAA Zink Karbon Batterie 1,5 v Batterie aaa r6 um3 trocken Trockenbatterie
Basisinformation
Modell: R03P, LR03/UM-4/AAA
Produktbeschreibung
1. grundlegende Informationen:
Product |
AA,AAA zinc carbon battery 1.5v dry cell battery aaa r6 um3 dry battery |
Chemical System |
Zinc-manganese dioxide (Zn/MnO2) |
Standard |
IEC standard |
Nominal voltage |
1.5 Volts |
Average capacity |
>480 mAh to 0.9 Volts |
Open-circuit voltage |
1.70 Volts |
Closed-circuit voltage |
1.53 Volts |
Diameter |
13.50-14.50MM |
Height |
49.20-50.50MM |
Average weight |
15.00 Grams |
Shelf life |
24 Months |
Battery material |
Manganese dioxide, Zinc, Acetylene black, Grophite powder, Carbon rod, Plating cap, Tinplate bottom etc |
4. technische Daten:
Art. No.
|
Type
|
Nominal Voltage |
Shelf Life (Month) |
Test Conditions |
Discharge Time |
|
IEC Standard(IEC 60085-2:2007) |
tinko |
|||||
kT
|
R6P AA UM-3 |
1.5
|
24
|
20±2°C,3.9ohm, 24h/d, E.P.V. 0.9V |
----- |
≥90 Min |
20±2°C,43ohm, 4h/d, E.P.V. 0.9V |
1620 Min |
≥1740 Min |
Qualitätskontrolle & Leistung:
1) unsere Batterie besteht aus qualitativ hochwertigen Rohstoffen, die unbedingt vor Nutzung.
2 kontrolliert wurde) unsere Arbeiter und Techniker genau beobachtet jeden Schritt in den Produktionsprozessen der Batterie streng ausgeführt das Qualitätsmanagementsystem um jede Batterie bis zu IEC Standard.
3 versichern) unserer Batterie hat die Eigenschaften von hoher Kapazität, lange Lebensdauer, super dicht, gute Leistung der kontinuierlichen Austrag, lange Zeit der zeitweiligen Entlastung, und es hat geringen Rückgang von Kapazität.
Produkt Verfahren:
1 |
Zinc can |
The zinc can is the negative terminal and anode material |
2 |
Inserting the separator |
The separator and the bottom paper are inserted to prevent battery short-circuit between the positive and the negative electrode. |
3 |
Filling cathode material |
The mixture of manganese dioxide, electrolyte and others are filled as the cathode material |
4 |
Inserting carbon rod |
The carbon rod for collecting electricity is inserted into the middle of the battery |
5 |
Sealing |
The plastic gasket for sealing is fitted to prevent leakage and water evaporation |
6 |
Fitting tinplate bottom and metal jacket |
The tinplate bottom and washer are placed on the bottom of zinc can and covered by metal jacket |
7 |
Finished product |
The finished battery is packed by shrink after inspecting on its voltage, current and appearance |
Produktgruppe : Super Heavy Duty Batterie / Zink-Chlorid-Batterie